ITO conductive ink: Advances in materials, preparation and potential sensor applications

Main Article Content

Article Sidebar

Published Sep 21, 2021
Preetam Hiroli Mahendra Kumar S Manjunatha C

Abstract

The global conductive ink market size has been expected around a CAGR of 4.1%, by value and
the market is estimated to be USD 3.0 to 3.7 billion in 2020-2025. Indium tin oxide (ITO) ink is
used as conducting ink and in engineering applications. Therefore the review is aimed to provide
more insights into various reactants precursors, conditions, and synthesis procedure for the
development of ITO nano inks. The merits and demerits of the various methods such as
hydrothermal, solvothermal, spray pyrolysis, sol-gel, and electrophoretic deposition, magnetron
sputtering etc, used for making ITO nanoparticles were discussed in detail. Further, various ink
properties, parameters and processes for development of ITO nano ink proposed by different
research groups is also discussed. The suitable conditions to print the prepared ITO ink on
suitable substrate using ink-jet fabrication methodology discussed by various research groups
is also explored. Also, the review focusses on the study of the properties of the printed ink such
as transmittance and the sheet resistance is also studied. Finally the sensitivity, response and
recovery of the ITO coated electrode developed for various sensor applications is discussed in
detail.

How to Cite

Hiroli, P., Mahendra Kumar S, & Manjunatha C. (2021). ITO conductive ink: Advances in materials, preparation and potential sensor applications. SPAST Abstracts, 1(01). Retrieved from https://spast.org/techrep/article/view/1118
Abstract 87 |

Article Details

Keywords

ITO, Nanomaterials, Nano ink, Sensor, Thin film, Tin Oxide, Indium Oxide, Conductive ink

References
[1] Gilshtein E, Tacneng J, Bolat S, Torres Sevilla G, Romanyuk Y. Invisible and flexible printed sensors
based on ITO nanoparticle ink for security applications. Frontiers in Nanotechnology. 2021;3:55.
[2] Serkov AA, Snelling HV, Heusing S, Amaral TM. Laser sintering of gravure printed indium tin oxide
films on polyethylene terephthalate for flexible electronics. Scientific reports. 2019 Feb 11;9(1):1-8.
[3] McGhee JR, Goulas A, Southee DJ, Sagu JS, Engstrøm DS, Wang J, Hutt DA, Evans PS, Zhou Z,
Wijayantha KG, Conway P. Indium tin oxide nanowires manufactured via printing and laser
irradiation. Applied Materials Today. 2020 Dec 1;21:100835.
[4] Azani MR, Hassanpour A, Torres T. Benefits, Problems, and Solutions of Silver Nanowire
Transparent Conductive Electrodes in Indium Tin Oxide (ITO)‐Free Flexible Solar Cells. Advanced
Energy Materials. 2020 Dec;10(48):2002536.
[5] Mamidanna A, Jeffries A, Bertoni M, Hildreth O. Adhesion of reactive silver inks on indium tin
oxide. Journal of Materials Science. 2019 Feb;54(4):3125-34
Section
SE2:Wearable Electronics

Most read articles by the same author(s)

1 2 > >>